BenQ TK700ST - Page 28

28 Menu operation
Game Settings
The following projector settings can minimize the response time between
the input source and the displayed image. Please set your projector OSD
and input timing at these conditions to enjoy low latency gaming
experience.
• 0 for the Advanced menu - Installation > 3D Keystone
• Off for the Advanced menu - Installation > Auto Vertical Keystone
• Auto for the Advanced menu - Display > Aspect Ratio
• 4K 60Hz, or 1080p 60Hz/120Hz/240Hz for the input timing
• Game Mode
You can select a preferred mode from among FPS, RPG, SPG. When one of
the modes is set, Picture Mode will switch to Game.
• FPS (First-Person shooting): Enhances detail viewing experience by
revealing all the enemies hidden in the dark shadow, and provides
surrounding sound to hear the distant footsteps and gunshot and
recognize their directions.
• RPG (Role-Playing): Provides CinematicColor and powerful cinema
sound as if in a film-like and role-playing game world.
• SPG (Sports): Provides true colors and live vocal sound to enjoy a
live broadcast sports game.
User
Management
There is one user-definable mode if the current available picture modes are
not suitable for your need. You can use one of the picture modes (except
the User) as a starting point and customize the settings.
• Load Settings From
1. Go to Picture > Picture Mode.
2. Press / to select User.
3. Press to highlight User Management, and press OK. The User
Management page is displayed.
4. Select Load Settings From and press OK.
5. Press / to select a picture mode that is closest to your need.
6. Press OK and BACK to return to the Picture menu.
7. Press to select the sub-menu items you want to change and adjust
the values with / . The adjustments define the selected user mode.
• Rename User Mode
Select to rename the customized picture mode (User). The new name can
be up to 9 characters including English letters (A-Z, a-z), digits (0-9), and
space (_).
1. Go to Picture > Picture Mode.
2. Press / to select User.
3. Press to highlight User Management, and press OK. The User
Management page is displayed.
4. Press to highlight Rename User Mode and press OK. The Rename
User Mode page is displayed.