35 Menu operation
HDMI Settings
• HDMI Format
Selects a suitable RGB color range to correct the color accuracy.
• Auto: Automatically selects a suitable color range for the incoming
HDMI signal.
• Limited: Utilizes the Limited range RGB 16-235.
• Full: Utilizes the Full range RGB 0-255.
• HDMI Equalizer
Sets a suitable value to maintain the HDMI picture quality in long distance
data transmission.
• HDMI EDID
Switches between Enhanced for HDMI 2.0 EDID and Standard for HDMI 1.4
EDID. Selecting Standard which supports up to 1080p 60Hz may solve
abnormal display issues with some old players.
• Electronics Control
When you enable this function and connect an HDMI CEC-compatible
device to your projector with an HDMI cable, turning on the HDMI CEC
compatible device automatically turns on the projector, while turning off
the projector automatically turns off the HDMI CEC compatible device.
• Audio Return + (HDMI-2)
When connecting to eARC compatible speaker to the projector with HDMI
cables, the audio can be returned to these speakers from the projector
HDMI 2 port.
HDMI-1 can output audio to external speakers via eARC function (HDMI-2).
Audio Return+ supports multi-audio outputs including 2.0, 5.1, 7.1 and
Dolby Atmos to external audio system like soundbar.
The following audio output formats are provided to achieve the audio
performance you desire: LPCM supports 2 channel audio output, RAW
supports 5.1 channel audio output, and RAW+ supports Dolby Atmos audio
output.
To enjoy Audio Return+ sound effect, make sure to turn on the eARC
function from your soundbar as well.
• Power On Link/Power Off Link
When you connect an HDMI CEC-compatible device to your projector with
an HDMI cable, you can set the behavior of powering on/off between the
device and the projector.
Reset Display
Returns all the settings on the Display main menu to the factory default
values.
Power On Link >
From Device
When the connected device is turned on, the projector
will be activated, too.
Power Off Link>
From Projector
When the projector is turned off, the connected
device will be shut down, too.
To Next Page
Loading...
