BenQ TK700ST - Page 36

36 Menu operation
4. Main menu: Installation
Structure
Function descriptions
Menu Options
Projector Position Front/Front Ceiling/Rear/Rear Ceiling
3D Keystone
H: -30 – +30
V: -30 – +30
R: -30 – +30
Auto Vertical
Keystone
Off/On
LumiExpert
LumiExpert Off/On
LumiExpert Level -1 – 0 – 1
Manual Calibration
Manual Calibration Status
Calibrate
Reset Manual Calibration
Test Pattern Off/On
High Altitude
Mode
Off/On
Baud Rate 9600/14400/19200/38400/57600/115200
Menu Descriptions
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See Choosing a location on page 11 for details.
3D Keystone
See Correcting keystone on page 15 for details.
This image adjustment might impact latency in Game Mode. We suggest
setting the 3D Keystone values to 0 to enjoy low latency gaming.
Auto Vertical
Keystone
Automatically corrects the vertical keystoning of the projected image.
This image adjustment might impact latency in Game Mode. We suggest
turning Auto Vertical Keystone off to enjoy low latency gaming.
LumiExpert
• LumiExpert
When this function is enabled, the projector actively detects the ambient
light conditions and automatically adjusts balanced visual brightness to
create an optimum viewing experience.
This function is not available when the Picture Mode is Bright, 3D, or HDR10/HLG.
• LumiExpert Level: Adjusts the gamma offset.
• Manual Calibration: According to the ambient brightness, you can do the
calibration manually.
• Manual Calibration Status: Shows the status of manual calibration.
• Calibrate: Enact this item to start the calibration process.
• Reset Manual Calibration: Resets the gamma offset to factory
preset values.