36 Menu operation
HDMI Settings
• Signal Format
Selects a suitable RGB color range to correct the color accuracy.
• Auto: Automatically selects a suitable color range for the incoming
HDMI signal.
• Limited: Utilizes the Limited range RGB 16-235.
• Full: Utilizes the Full range RGB 0-255.
• Equalizer
Sets a suitable value to maintain the HDMI picture quality in long distance
data transmission.
• EDID
Switches between Enhanced for HDMI 2.0 EDID and Standard for HDMI 1.4
EDID. Selecting Standard which supports up to 1080p 60Hz may solve
abnormal display issues with some old players.
• HDMI Device Control
When you enable this function and connect an HDMI CEC-compatible
device (e.g. QS02, a soundbar) to your projector, the projector remote
control can control the device’s menu or volume during the projector
power-on state.
• Power On Link/Power Off Link
When you connect an HDMI CEC-compatible device to your projector with
an HDMI cable, you can set the behavior of powering on/off between the
device and the projector.
4K Upscaling
Enables or disables "XPR always ON" which upscales all input timings to
4K resolution.
Reset Display
Returns all the settings on the Display main menu to the factory default
values.
Power On Link >
From Device
When the connected device is turned on, the projector
will be activated, too.
Power Off Link >
From Projector
When the projector is turned off, the connected device
will be shut down, too.
To Next Page
Loading...
