Menu operation 34
Advanced menu
Picture
Menu Type Switches to the Advanced OSD Menu. See Advanced menu on page 34.
Picture Mode See Picture Mode on page 32.
Details
Adjustment
Adjusts the level of detail clarity. The higher the effect, the more details will
be shown but with lower black performance.
User
Management
• Load Settings From
There is one user-definable mode if the current available picture modes are
not suitable for your need. You can use one of the picture modes (except the
User) as a starting point and customize the settings.
1. Go to Picture > User Management.
2. Press to select Load Settings From and press OK.
3. Press to select a picture mode that is closest to your need.
4. Press to select the sub-menu items you want to change and adjust the
values with / . The adjustments define the selected user mode.
• Rename User Mode
You can change User to a name that is easier to identify or understand by the
users of this projector. The new name can be up to 9 characters including
English letters (A-Z, a-z), digits (0-9), and space (_).
1. Go to Picture > User Management.
2. Press to select Rename User Mode and press OK.
3. Use / / / , and OK to set desired characters.
4. When done, press to save the changes and exit.
Brightness
The higher the value, the brighter the image. Adjust this control so the black
areas of the image appear just as black and that detail in the dark areas is
visible.
Contrast
The higher the value, the greater the contrast. Use this to set the peak white
level after you have previously adjusted the Brightness setting to suit your
selected input and viewing environment.
Color
A lower setting produces less saturated colors. If the setting is too high,
colors on the image will be overpowering, which makes the image
unrealistic.
Tint
The higher the value, the more greenish the picture becomes. The lower the
value, the more reddish the picture becomes.
Sharpness The higher the value, the sharper the picture becomes.
To Next Page
Loading...
