30
Using the projector
Setting a preferred color temperature
To set a preferred color temperature:
1. Highlight Color Temperature in the Picture -- Basic menu and select Lamp Native, Warm,
Normal or Cool by pressing / on the projector or remote control.
2. Highlight Color Temperature Fine Tuning in the Picture -- Advanced menu and press
ENTER. The Color Temperature Fine Tuning page displays.
3. Press / to highlight the item you want to change and adjust the values by pressing / .
• Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.
• Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.
4. To save and leave the settings, press MENU once or EXIT twice.
Selecting a Gamma setting
Highlight Gamma Selection in the Picture -- Advanced menu and select a preferred setting by
pressing / on the projector or remote control.
Gamma refers to the relationship between input source and picture brightness.
• Gamma 1.6/1.8/2.0/BenQ
Select these values according to your preference.
• Gamma 2.2
Increases the average brightness of the picture. Best for a lit environment, meeting room or family
room.
• Gamma 2.4/2.5
Best for viewing movies in a darkened environment.
• Gamma 2.6/2.8
Best for viewing movies which are mostly composed of dark scenes.
Adjusting Brilliant Color
Highlight Brilliant Color in the Picture -- Advanced menu and select On by pressing / on the
projector or remote control.
This feature utilizes a new color-processing algorithm and system level enhancements to enable higher
brightness while providing truer, more vibrant colors in picture. When set to "Off", Brilliant Color is
disabled.
To Next Page
Loading...
