EasyManua.ls Logo

BenQ W7000+ - Page 59

BenQ W7000+
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
Using the projector
Supported timing for EDTV and HDTV (via Component 1/ Component 2 inputs)
*Supported timing for non-3D and 3D signal with 2D 3D Conversion format.
Supported timing for Video and S-Video inputs
*Supported timing for non-3D and 3D signal with 2D 3D Conversion format.
Timing Resolution H. Freq. (KHz) V. F re q . ( H z ) Dot Clock Freq. (MHz)
480i 720 x 480* 15.73 59.94 13.5
480p 720 x 480* 31.47 59.94 27
576i 720 x 576* 15.63 50 13.5
576p 720 x 576* 31.25 50 27
720/50p 1280 x 720* 37.5 50 74.25
720/60p 1280 x 720* 45.00 60 74.25
1080/50i 1920 x 1080* 28.13 50 74.25
1080/60i 1920 x 1080* 33.75 60 74.25
1080/24P 1920 x 1080* 27 24 74.25
1080/25P 1920 x 1080* 28.13 25 74.25
1080/30P 1920 x 1080* 33.75 30 74.25
1080/50P 1920 x 1080* 56.25 50 148.5
1080/60P 1920 x 1080* 67.5 60 148.5
Video mode H. Freq. (KHz) V. Freq . ( Hz )
Sub-carrier Freq.
(MHz)
NTSC* 15.73 60 3.58
PAL* 15.63 50 4.43
SECAM* 15.63 50 4.25 or 4.41
PAL-M* 15.73 60 3.58
PAL-N* 15.63 50 3.58
PAL-60* 15.73 60 4.43
NTSC4.43* 15.73 60 4.43
http://www.pureglare.com.au

Table of Contents

Other manuals for BenQ W7000+

Related product manuals