220 Series 17
Installing the antenna ANT5-15
The ANT5-15 has greater gain than the communicator's integrated antenna in the version with housing, and can be mounted
outdoors within 15 m of the communicator, to improve GSM reception.
Refer to the installation instructions included with the ANT5-15 antenna.
Tamper detection
The version with housing of the communicator is equipped with a device which detects when the cover is opened and the
communicator is removed from the wall (tampering).
Tampering is reported by the Tamper event, to which actions can be associated (activate outputs, send voice, SMS or digital
message) with the Console: the factory setting is that terminal T5 is floating (it is normally connected to earth) in the event of tamper.
Once you have programmed the function, close the cover and power up the communicator.
After initialisation, open the cover and check that the communicator actually executes the actions programmed for the tamper
detection.
To Next Page
