52 Universal Cellular Communicator
Event Log
The Event Log page displays the events logged by the communicator.
The communicator can save up to 2048 events: when the buffer is full, each new event overwrites the oldest, which is thus lost.
Each event indicates the date and time at which it occurred.
Symbols on the Event Buffer bar
Click on this icon to load the new events the next time a Global Upload or Communicate Tags is run.
Click on this icon to cancel the selection of events in the event buffer.
Click on this icon to open a window for saving an .XML file of the events loaded in the Event Log page.
The .XML file can be viewed with Excel or a compatible application.
Click on this icon to display the events in relation to the criteria indicated in the Events In and With Text options.
Events In: select the events you wish to view: All Events, Today, Last 7 Days, Last 14 Days, Last 30 Days, Last
Ye ar or Custom.
Select Custom to set a specific period of time.
With Text: only events containing the specified text will display.
Firmware Update
Only the level 4 installer, when enabled by the installer, can run firmware updates.
The Firmware Update page updates the communicator's firmware, both locally (PC-Link or USB) and remotely (cellular data
network).
Click on Select Firmware File to select the update file.
If the firmware update does not terminate successfully, the communicator will continue using the old version.
The name of the firmware file has the format FWxxyyzz.bin where:
FW identifies the file as firmware;
xx is the higher revision number;
yy is the lower revision number;
zz is the test revision number;
.bin is the extension for a binary file.
To Next Page
Loading...
