Need help?Do you have a question about the Bentel Security B3G-220 and is the answer not in the manual?
General| Model | B3G-220 |
|---|---|
| Category | Modem |
| Manufacturer | Bentel Security |
| Communication Technology | 3G |
| Frequency Bands | 850/900/1800/1900 MHz |
| SIM Card Slots | 1 |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to +55°C |
| Protocols | TCP/IP, UDP, HTTP, FTP, SMTP |
| Compatibility | Compatible with Bentel Security control panels |
Details electrical, physical, and operating parameters of the device.
Provides step-by-step instructions for installing the kit version of the communicator.
Details the process of mounting and installing the communicator in its housing.
Guides on powering up the device and performing initial tests.
Instructions for connecting the external ANT5-02 antenna to improve GSM reception.
Details on installing the ANT5-15 external antenna for enhanced GSM reception.
Explains the tamper detection feature and its configuration.
Outlines different user access levels and their permissions within the system.
Explains the operation of the PSTN communication channel.
Explains the operation of the GSM communication channel.
Steps for installing and running the programming Console software.
Procedure to reset the communicator to its original factory default settings.
Setting up terminals as inputs or outputs and defining their behavior.
Settings for connecting to and configuring IP receivers for event reception.
Procedures for updating firmware and exporting settings using a USB key.
To Next Page
