Bentone B 40 A2.2H - Electrical Connection

18
BENTONE
!
Ifanyelectricalconnectionisusedotherthanthat
recommendedbyCTC,theremaybeariskofdamageto
propertyandpersonalinjury.
4.6 Electrical connection
• Before work on the electrical connection, the current must be
disconnected so that the installation is isolated.
• Electrical connection must be done in accordance with the applicable
regulations.
• Burners must be connected to an all-pole switch.
• Connection must conform to the wiring diagram.
• Use appropriately sized fuses.