Bentone B 40 A2.2H - 2 Technical Data; Dimensioner B 40 A2.2 H; Burner Installation

7
BENTONE
165 105 32-4
2. Technical data
The burner is intended for:
• Operation in installations according to EN 303 and EN 267.
When operating with a hot air boiler, the LMO24.255 or LMO44.255 control unit must be used.
Fuels:
• HVO/XTL according to EN 15940.
• Fuel oil according to DIN 51603-1.
• Fuel oil A Bio 10 according to DIN 51603-6.
2.1 Dimensioner B 40 A2.2H
* Min. recommended distance to oor.
d1 d2 d3
ø 115 (130) 14 ø 200-250
2.2 Burner installation
2.2.1 Hole patten
Make sure the hole pattern on the boiler is designed for burner ange.
A Ø B Ø C D E F G H I * J
174/274/372 130 114 420 260 310 360 207 435 200
J
H
I
øB øC
E
G
F
A D
d
1
d
2
d
3