Bentone B 40 - Service and Maintenance; Burner Service Schedule; Component Replacement Intervals

28
Bentone
165 405 07-2 2022-10-04
Components Service life – Recommended
replacement
Service life – Recommended
replacement Operating cycles
Control system 10 years 250,000 cycles
Pressure switch 10 years 250,000 cycles
Ignition system with  ame guard 10 years 250,000 cycles
UV  ame sensor 10,000 h N/A
Damper motor 500,000 cycles
Contactor 10 years 500,000 cycles
Burner 1 year 3,000 h
Filter 1 year replacement 3,000 h replacement
Oil hose 1 year inspection/replacement
Nozzle 1 year replacement 3,000 h replacement
Electrodes Replacement/cleaning 1 year Replacement/ceaning 3,000 h
Brake disc Replacement/cleaning 1 year Replacement/ceaning 3,000 h
Motor 1 year 3,000 h
Drive shaft Check/replace in the event of damage Check/replace in the event of damage
Fan wheel “1 year
Replace if need for cleaning/imbalance”
“3000 h
Replace if need for cleaning/imbalance”
Oil  lter Once a year 3,000 h replacement
Oil valve Tightness check once a year Replace if leakage detected
The burner and its components must be recycled according to applicable regulations.
7. Service
Service and maintenance work may only be performed by quali ed
personnel. Perform operational check of all safety systems and components
at each service. Only Enertech original parts should be used when replacing
components.
!
Usecautionwhenoperatingtheburner,surfacesmaybehot.
7.1 Burner Service Schedule, Oil
Servicing must be carried out once a year or after 3,000 hours of operation.
7.2 Component replacement intervals