Beretta Ciao C.A.I - Case Disassembly (C.A.I.-C.S.I. Version)

25
caldaie
4.4.5 CASE DISASSEMBLY (C.A.I.-C.S.I. Version)
OPERATION SEQUENCE ITEM INVOLVED TOOLS NEEDED FOR
WITH OPERATION THE OPERATION
5 • Disconnect the boiler from the electricity
supply
• Turn off the gas tap
5.1 Unscrew the screws (1) holding the control
panel-case N. 2 screws Magnetic PH2 screwdriver
5.2 Turn the control panel forward to stop Front panel No tools – by hand
5.3 Unscrew the screws (2) holding the case
- 2 screws Magnetic PH2 screwdriver
5.4 Pull the bottom of the case forward and
upward to free it from the framework Case No tools – by hand
!!
Work the other way round from the above for reassembly operations.
!!
MAKE FUNCTIONAL TESTS PAGES 65, 66 and 67.
2
1