EXTRAS – BCAS MODE
This setting changes the behavior of the legacy instant controls, to not
require touching pitch bend up for patch change. Only has effect when
LEGACY BR is ON.
EXTRAS – DAC OUT
This setting controls the DAC output channel. The available options are:
BRTH - Output the breath sensor signal.
PTCH - Output note pitch (v/Oct).
For NuEVI Plus, NuEVI CV or standard NuEVI or NuRAD with CV box or
module, the PTCH option should be selected.
EXTRAS – BAT TYPE
To have the battery voltage monitoring correctly representing the battery
type used in the controller, use the corresponding setting.
ALK – Alkaline batteries (100% at 4.6V, LOW BAT at 3.8V)
NMH – NiMH rechargeable batteries (100% at 3.9V, LOW BAT at 3.6V)
LIP – LiPo rechargeable battery (100% at 4.3V, LOW BAT at 3.7V)
EXTRAS – FAST BOOT
Enabling this setting will make the NuEVI start up as fast as possible when
powered on.
To Next Page
Loading...