Transport
Operating manual, Dumper – 3012 PLUS
123 - 131
28 April 2015
Bergmann Maschinenbau GmbH & Co. KG
To mechanically release the parking brake (emergency release)
you need to apply a torque of minimum 40 Nm or 70 Nm
respectively to the adjusting screw!
Tighten the retaining nut and secure the screw cap by a few
revolutions only (to protect the mechanism against dirt).
After the parking brake has been mechanically released, the
dumper must be secured against rolling away with chocks. Before
restarting the dumper, reset the parking brake mechanism.
To Next Page
Loading...
