Bernette b35 - Zigzag Stitch

12
bernette SEWING MACHINE WORKBOOK
80/12 Universal
Firm woven fabric, 4” x 6”
Zigzag Foot
ZIGZAG STITCH
As directed in instructions
Select the Zigzag Stitch (width = 4, length = 2).
1.
Finish one 6” edge using the following steps.
2.
Align the edge of the fabric with inner toe of presser
foot so stitch falls on edge of the fabric.
3.
Sew using the inside edge of the right toe as a guide.
4.
The needle should go into the fabric on one stroke of
the needle and over the edge on the next stroke.
5.
Notes:
The zigzag stitch makes a good nish for raw edges.
Do not use too long a stitch or too wide a stitch; the edge
should lie at, not roll.
Match the weight of the thread to the weight of the fabric
for best results.
HOW
Do you know how to:
• Adjust the stitch width?
• Adjust the stitch length?