Bernina 215 - Setting Up the Sewing Computer - Presser Foot and Spool Pin; Changing the Presser Foot Sole; Supplementary Spool Pin

15 Setting up the sewing computer
Supplementary spool pin
A
Changing the presser foot sole
Changing the presser foot
sole
•
raise the needle and the
presser foot shaft
•
turn power switch to «0»
•
press the button on the shaft
to release the sole
Attaching the presser foot
sole
•
place the presser foot sole
under the shaft so that the
peg sits under the opening of
the shaft
•
lower the presser foot lifter
and the foot sole will click
into position
Please refer to the
safety instruction!
Collapsible vertical spool pin
•
found on the back of the sewing computer behind the
handwheel
•
essential aid for sewing with more than one thread, i.e. double
needle work
•
raise the pin until it clicks into its vertical position
•
when using large reels, add the foam pad A for stability