Standard Accessories
8
Accessories
•
Fabric cover
•
Accessory case
•
2 bobbins (one of them in the
bobbin case)
•
Presser feet shaft with 5 soles
•
Selection of 130/705H needles
•
Seam ripper
•
Lint brush
•
3 spool discs
•
Foam pad
•
Oiler
•
Foot control
•
Power cable
•
Angular Torx button
•
Warranty card
The foot control regulates the
sewing speed
Sewing speed is adjusted by
applying more or less pressure
to the foot control.
Important! (USA/Canada only)
Use only foot controller type
SR-1 with sewing computer
B215.
Foot control
Self storing cord
•
wind the cord on the reel
•
insert the plug into the
groove provided
When sewing
•
unwind the cableThe power cable
•
plug A into sewing computer
•
plug B into wall socket
Foot control cable
•
plug C into sewing computer
Power switch (D)
1 the computer is switched on
0 the computer is switched off
The sewing light is switched on
and off with the power switch.
Power cable
A
C
B
Important! (USA/Canada only)
This sewing computer has a
po la rized plug (one blade wider
than the other). To re duce the
risk of electric shock, this plug
is intended to fit in a polarized
outlet only one way. If the plug
D
does not fit fully in the outlet,
reverse the plug. If it still does
not fit, contact a qualified elec-
trican to install the proper out-
let. Do not modify the plug in
any way.
Refer to the safety
instruction!
To Next Page
Loading...
