Setting up the sewing computer
16
Threading the upper thread
Attaching the thread spool
•
raise the needle and the presser foot
•
switch the power off
•
attach the foam pad
•
place spool on pin (thread unwinds clockwise)
•
attach the appropriate spool disc - diameter of spool disc is disc
size. There must be no clearance between the disc and the spool
•
take thread through rear guide A
•
then into slit of upper thread tension
•
pull thread down to the right of the take-up cover to B
•
take thread up to the left of the cover to C in the direction of
the arrow, placing it in the take-up level
•
take thread down and through guides D and E
Please refer to the
safety instruction!
A
C
D
E
B
To Next Page
Loading...
