My BERNINA
18
BERNINA SEWING MACHINE WORKBOOK
MIRROR IMAGE/PATTERN REPEAT
Horizontal Mirror Image (Left/Right):
• Machine sews selected stitch in Horizontal Mirror Image.
• Right/left is determined by the sewing direction.
Vertical Mirror Image (Up/Down):
• Machine sews selected stitch in Vertical Mirror Image.
• Up/down is determined by the sewing direction.
Firm woven fabric, 4” x 6”*
Lightweight tear-away stabilizer 4” x 6”*
80/12 Universal
Polyester or cotton embroidery thread
Default
Open Embroidery Foot #20/20C/20D
1. Attach Open Embroidery Foot #20/20C/20D.
2. Place stabilizer behind fabric.
Left/Right Mirror Image:
1. Select the Blanket Stitch #1329 for 7/8 Series/#1309 for
4 and 5 Series from the Quilting Stitch menu.
2. Sew one row down length of fabric.
3. Engage Left/Right Mirror Image and sew a second row
next to the rst, using the side of the Presser Foot for
spacing.
Pattern Repeat:
1. Select the satin stitch arrowheads stitch #401.
2. Select the "i". Change Pattern Repeat to 4x.
Up/Down Mirror Image:
1. Stitch one stitch pattern for a total of 4 arrowheads.
The machine will stop when the stitch pattern is
complete.
• Tip: To make sure you have a complete pattern,
depress the foot control and do not lift your foot
until the machine stops.
2. Engage Up/Down Mirror Image. The entire stitch
pattern of four arrowheads will be mirror imaged.
3. Stitch one stitch pattern for a total of four arrowheads.
4. If desired, repeat the previous two steps to stitch four
complete sets of arrowheads.
HOW
Do you know how to:
• Tell the difference between Left/Right
and Up/Down Mirror Image functions?
• Engage Pattern Repeat?
To Next Page
Loading...
