Bernina 480 - Triple Straight Stitch

My BERNINA
24
BERNINA SEWING MACHINE WORKBOOK
TRIPLE STRAIGHT STITCH
Notes:
The Triple Straight Stitch creates a very sturdy seam on items
that will receive a lot of wear.
It also creates beautiful bold topstitching with regular
weight thread that mimics the look of a heavier decorative
topstitching thread and a topstitch needle.
Triple Straight Stitch Seam
1. Attach Reverse Pattern Foot #1/1C/1D to the machine.
2. Select the Triple Straight Stitch #6.
3. Place the fabric pieces right sides together.
4. Position the edge of the fabric along the 5/8” mark on
the Stitch Plate.
5. Sew the seam and press it open.
Triple Straight Stitch Edgestitching
1. Change to Edgestitch Foot #10/10C/10D and adjust the
needle position to the far right.
2. With the right side of the fabric up and with the guide
of the foot in the ditch of the seam, sew the length of
the seam from top to bottom.
3. Adjust the needle position to the far left.
4. Stitch a second time with guide of the foot in the ditch
of the seam. Sew in the same direction as before.
Firm woven fabric, 4” x 6”, two pieces
80/12 Universal (for best results use a
Topstitch Needle)
Polyester or cotton embroidery thread
As directed in instructions
Reverse Pattern Foot #1/1C/1D
Edgestitch Foot #10/10C/10D
(optional accessory)
HOW
Do you know how to:
• Adjust the needle position?
• Use Edgestitch Foot #10/10C/10D?
• Use the Triple Stitch Function on the B
770 QE PLUS, 735, 590 and 570 QE?