My BERNINA
28
BERNINA SEWING MACHINE WORKBOOK
STRETCH STITCH
1. Attach Reverse Pattern Foot #1/1C/1D to the machine.
2. Select the Super Stretch Stitch #11.
3. Place the fabric pieces right sides together.
4. Position the edge of the fabric on the 5/8” marking on
the Stitch Plate.
5. Sew the seam.
NOTE:
If the fabric is pulling and stretching as it is sewn,
adjust the Presser Foot pressure to a lower number to light-
en the pressure of the foot on the fabric and eliminate the
stretching.
Spandex, 4” x 6”, two pieces
80/12 Universal (Ballpoint or Stretch
may also be used)
Polyester or cotton sewing thread
As programmed
Reverse Pattern Foot #1/1C/1D
HOW
Do you know how to:
• Adjust the Presser Foot pressure?
• What fabric types you would use with
this stitch?
To Next Page
Loading...
