Bernina 435 User Manual (English)

Other manuals for Bernina 435

Workbook70 pages

User Manual112 pages

Questions and Answers:

C
Christopher RamosAug 16, 2025
What to do if my Bernina 435 Sewing Machine is skipping stitches?
- A
  Amanda HendricksAug 16, 2025
  Skipped stitches on your Bernina Sewing Machine can be caused by an incorrect needle. Ensure you are using the needle system 130/705H. A blunt or bent needle can also cause skipped stitches, so replace the needle. Using a new BERNINA quality needle is also recommended. Also, check that the needle is correctly inserted with the flat side to the back, as far up as it will go into the needle holder, and that the screw is tightened. Finally, ensure that the needle point matches the texture of the material.
M
Molly FrankAug 19, 2025
What to do if I get an error during a software update on my Bernina 435?
- A
  Amber BassAug 19, 2025
  If you encounter an error during a software update on your Bernina Sewing Machine, ensure you are using a BERNINA USB stick. If the update process is blocked and the hourglass on the display is inactive, try removing the USB stick, switching the machine off and on, or following the instructions on the display. If the date of the software update cannot be found, unzip the update data or save the software update data directly on the data medium and not in a file on the USB stick.
A
amillerAug 22, 2025
What to do if my Bernina Sewing Machine doesn't start?
- B
  Brent DurhamAug 22, 2025
  If your Bernina Sewing Machine doesn't start, it could be due to an unfavorable room temperature. Place the machine in a warm room one hour before use. If that doesn't work, the machine may be damaged, and you should contact a specialized BERNINA dealer.
E
Erica ObrienAug 25, 2025
Why does my Bernina 435 Sewing Machine have uneven stitch formation?
- S
  Shawn SpencerAug 26, 2025
  Uneven stitches can occur if the upper thread tension is either too tight or too loose, so try adjusting it. Also, a blunt or bent needle can cause this, so replace it with a new BERNINA quality needle. Other causes include using a poor-quality needle or thread, an incorrect needle/thread combination, incorrect threading, pulling the fabric, or using the wrong bobbin case. Ensure you are using a quality thread, matching the needle to the thread size, rethreading the machine, feeding the fabric evenly, and using the supplied bobbin case with triangles.
J
jloweAug 28, 2025
Why does the upper thread keep breaking on my Bernina 435?
- M
  Margaret ButlerAug 28, 2025
  Upper thread breaks may occur due to an incorrect needle/thread combination, so match the needle with the thread size. If the upper thread is too tight, reduce the upper thread tension. Reroute the thread if the machine is incorrectly threaded. Using quality thread can also prevent thread breaks. If the stitch plate or hook tip is damaged, contact a specialized BERNINA dealer for repairs. Also, ensure the thread isn't caught in the thread take-up lever area; if so, slide the headframe to the left to remove it, clear any thread remnants, then reattach the headframe.
A
Anna BaileyAug 31, 2025
Why does the needle keep breaking on my Bernina 435 Sewing Machine?
- A
  Allison RodriguezAug 31, 2025
  If the needle breaks on your Bernina Sewing Machine, make sure the needle is correctly inserted with the flat side to the back, as far up as it will go into the needle holder, and tighten the screw. Avoid pulling or pushing the fabric; instead, feed it evenly. If working with thick fabric, use an appropriate presser foot like Jeans foot No. 8. Finally, ensure you are using quality thread to prevent knotted thread.
T
timothylawrenceSep 2, 2025
What to do if my Bernina 435 Sewing Machine has faulty stitching?
- M
  Matthew MorseSep 3, 2025
  If you are experiencing faulty stitching with your Bernina Sewing Machine, there may be thread remnants between the thread tension discs. To resolve this, fold a piece of thin material and slide the folded edge between the thread tension discs. Also, make sure that the machine is correctly threaded. Finally, remove any thread remnants below the bobbin case spring.
C
Christopher SawyerSep 6, 2025
Why is the lower thread breaking on my Bernina Sewing Machine?
- D
  Dr. Derrick YoungSep 6, 2025
  If the lower thread breaks on your Bernina Sewing Machine, the bobbin case may be damaged, so replace it. If the stitch hole in the stitch plate is damaged, contact a specialized BERNINA dealer for repairs. Also, a blunt or bent needle can cause this, so replace the needle.
D
Douglas SullivanSep 9, 2025
Why is the stitch width not adjustable on my Bernina Sewing Machine?
- S
  Shelia MeyerSep 9, 2025
  If the stitch width is not adjustable on your Bernina Sewing Machine, the selected needle and stitch plate may not be compatible. Try replacing the needle or the stitch plate.
C
Crystal RodriguezSep 12, 2025
Why is the speed too low on my Bernina Sewing Machine?
- F
  floresmichelleSep 12, 2025
  If your Bernina Sewing Machine's speed is too low, it could be due to an unfavorable room temperature. Place the machine in a warm room one hour before use. Alternatively, the sewing speed may need to be adjusted in the Setup Program.

Bernina 435 Specifications

General

Stitch Width	5.5 mm
Total Number of Stitches	650
Hook System	BERNINA Hook
Sewing Space to the Right of the Needle	7 inches
Color Touch Screen	Yes
Stitch Length	5 mm
Bobbin Winding While Sewing	Yes
Display	Color touch screen
Memory (short-term / altered settings)	Yes
Basting	Yes
Automatic Thread Cutter	Yes
Stitches	650
Free Arm	Yes
Sewing Speed	900 stitches per minute
Weight	20.9 lbs (9.5 kg)
Needle Threader	Automatic
Dimensions	44 x 22 x 36 cm