Practical stitches
80
6.10 Reinforced darning, automatic
NOTICE!This program can only be used with the Buttonholefoot No. 3A which is only available as
optional accessory at the specialized BERNINA retailers in some markets.
The reinforced Darning Program No. 23 is especially suitable for quick darning of worn or damaged areas.
The reinforced Darning Program No. 23 replaces threads along the lengthwise grain in all materials.
If the Darning Program does not cover the whole worn or damaged area, it is recommended to
reposition the work and the sew the Darning Program again. The length is programmed and can be
repeated as often as desired.
Via the direct entry length, a darning length up to 30 mm can be programmed.
> Attach the Buttonhole foot No. 3A.
> Touch the icon «Practical stitches».
> Select the reinforced Darning Program No. 23.
> Hoop light-weight materials in the round embroidery hoop (optional accessory).
– The darning area stays evenly taut and cannot be distorted.
> Start sewing top left.
> Sew the first row.
> Stop the machine.
> Push the button «Quick Reverse».
– The length is programmed.
> Finish sewing the Darning Program.
– The machine stops automatically.
To Next Page
Loading...
