Buttonholes
103
> Push the button «Start/Stop» or press the foot control.
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.
9.12 Cutting the buttonhole open with the seam ripper
> Place a pin in each end of the buttonhole to avoid accidental cutting into ends of buttonhole.
> Cut the buttonhole from both ends to the middle.
9.13 Cutting open buttonholes with the buttonhole cutter (optional
accessory)
> Place the fabric on an appropriate piece of wood.
> Position the cutter in the center of the buttonhole.
> Press down on the cutter with your hand.
To Next Page
Loading...
