My BERNINA
21
Illustration Name Purpose
Height compensation tool The height compensation tool
levels an angled position of the
presser foot sole when sliding
over thick seams.
Selection of needles The needle assortment contains
different versions and sizes of
needles for all the common
applications.
Screwdriver red The red screwdriver is supplied
as an all-round tool.
Brush The brush is used to clean the
feed dog and the hook area.
Lubricator The lubricator is used to fill up
the oil depots.
Power cable The power cable connects the
machine with the power supply
system.
Foot control Via the foot control the machine
is started and stopped. The
speed of the machine is also
controlled via the foot control.
Always use the foot control of
the type LV1 with this machine.
Use of the power cable (only USA/Canada)
The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!
Overview presser feet
NOTICE!Depending on the country where the deliveries are sent to, the contents either include
snap-on presser feet or standard presser feet. The respective standard accessory is shown in the
two following charts. When snap-on presser feet are delivered as standard accessory, a claim to
get standard presser feet for free can't be made. The standard presser feet can be ordered as
optional accessory.
To Next Page
Loading...
