Buttonholes
96
9.5 Cord
Using cord with the Buttonhole foot No. 3
Prerequisite:
• The Buttonhole foot No. 3 is attached and raised.
> Insert the needle at the beginning of the buttonhole.
> Hook the cord over the pin at the front of the buttonhole foot.
> Pull both cord ends under the buttonhole foot to the back and place each cord into one of the grooves
of the sole.
> Lower the buttonhole foot.
> Sew the buttonhole in the usual manner.
> Pull the cord through the buttonhole until the loop disappears in the bartack.
To Next Page
Loading...
