> Touch the icon «Adjust the length manually».
– Step 1 in the display is activated for the buttonhole start.
> Sew the desired buttonhole length.
– As soon as sewing is started, step 2 is activated.
> Stop the machine at desired length of the buttonhole or at the end of the length marking.
> Touch the icon «Scroll down» so that step 3 appears.
– The machine sews straight stitches in reverse.
> Stop the machine at the height of the first stitch where the buttonhole starts.
> Touch the icon «Scroll down» so that step 4 appears.
– The machine sews the upper bartack and stops automatically.
> Touch the icon «Scroll down» so that step 5 appears.
– The machine sews the second bead.
> Stop the machine at the height of the last stitch of the first bead.
> Touch the icon «Scroll down» so that step 6 appears.
– The machine sews the lower bartack and stops automatically.
> Touch the icon «Scrollen unten» so that step 7 appears.
– The machine secures and stops automatically.
9.10 Sewing the manual 5-step buttonhole with the Buttonhole foot
No. 3
The length of the buttonhole is determined manually while sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling using the arrow icons or by touching
the button «Quick Reverse».
Prerequisite:
• The Buttonhole foot No. 3 is attached.
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 54.
To Next Page
Loading...
