EasyManua.ls Logo

Bernina 435 - Overview Pintucks; Inserting the Cord

Bernina 435
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Decorative stitches
89
Overview pintucks
Pintuck foot Number Description
30 (optional accessory)
3 grooves
4 mm double needle: for heavy
fabrics.
31 (optional accessory)
5 grooves
3 mm double needle: for heavy
to medium-weight fabrics.
32 (optional accessory)
7 grooves
2 mm double needle: for light to
medium-weight fabrics.
33 (optional accessory)
9 grooves
1 or 1.6 mm double needle: for
very light fabrics (without
pintuck cord).
Inserting the cord
> Switch the machine off and disconnect it from the power supply system.
> Remove the needle.
> Remove the presser foot.
> Remove the stitch plate.
> Open the bobbin cover.
> Pull the cord through the hook opening from the bottom and through the opening of the stitch plate.
> Replace the stitch plate.
> Close the bobbin cover.
> Make sure that the cord slides through the little thread slot of the bobbin cover.

Table of Contents

Other manuals for Bernina 435

Related product manuals