Bernina 435 - Using Cord with the Buttonhole Foot No. 3 A (Optional Accessory)

Buttonholes
97
> Pull the ends of the cord through to the wrong side of the fabric (using a hand stitching-needle), knot or
secure with stitches.
Using cord with the Buttonhole foot No. 3A (optional accessory)
The cord reinforces and enhences the buttonhole and is particularly suitable for the Buttonhole No. 51.
Optimal cord is Perle cotton No. 8, strong hand-sewing thread and fine crochet yarn. It is recommended not
to hold the cord when sewing.
Prerequisite:
• The Buttonhole foot with slide No. 3A (optional accessory) is attached and raised.
> Insert the needle at the beginning of the buttonhole.
> Guide the cord on the right side under the buttonhole foot with slide.
> Hook the cord over the pin at the back of the buttonhole foot with slide.
> Pull the cord on the left side under the buttonhole foot to the front with slide.
> Pull the cord ends into the slits.