Bernina 435 - Machine Settings; Selecting a Language; Adjusting the Brightness of the Display

Setup Program
51
> In the section (3) touch the icon «Loudspeaker» to deactivate the signal for the selection of functions.
2
1
3
3.4 Machine settings
Selecting a language
The User Interface can be programmed in different languages according to the customer's wish because
BERNINA provides a wide range of international languages for the customers. Via firmware updates new
languages are provided for the User Interface as appropriate.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Language selection».
> Select a language.
Adjusting the brightness of the display
The brightness of the display can be adjusted corresponding to the personal preferences.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Adjust the brightness».
> Move the slide using the touchscreen pen/finger or touch the icons «+» or «-» o alter the brightness of
the display.