Bernina 435 - Data Management and Updates

Setup Program
54
Back to default setting
ATTENTION: Using this function will delete all individually made settings.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Default settings».
> Touch the icon «Default setting sewing».
> Touch the icon «Confirm» to restore the default settings for the sewing settings.
> Touch the icon «Default setting all».
> Touch the icon «Confirm» and restart the machine to restore all default settings.
Deleting user data
Motifs which are not needed anymore can be deleted so that there will be more capacity for new motifs.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Default settings».
> Touch the icon «Delete data from the personal memory».
> Touch the icon «Confirm» to delete all data from the personal memory.
Calibrating the Buttonhole foot No. 3A
The Buttonhole foot No. 3A is calibrated to this machine and they should only be used both together.
Prerequisite:
• The Buttonhole foot No. 3A is attached.
• The needle is not threaded.