Bernina 435 - Sewing Blind Hems

Practical stitches
83
> Attach the Blindstitch foot No. 5 or the Reverse pattern foot No. 1 or the Edge stitch foot No. 10
(optional accessory).
> Touch the icon «Practical stitches».
– The Straight stitch No. 1 is selected automatically.
> Place the inside upper edge right against the guide of the Blindstitch foot.
> Select the needle position far right to sew along the upper edge.
5/8
5/85/8
1
25 15 15
15
75
75
6.16 Sewing blind hems
For invisible hems in medium to heavy-weight cotton, wool and blended materials.
Prerequisite:
• The fabric edges are finished.
> Attach the Blindstitch foot No. 5.
> Touch the icon «Practical stitches».
> Select the Blindstitch No. 9.
> Fold the fabric back over the right side of the fabric to expose the finished lower edge.
> Place the fabric under the presser foot and move the folded edge against the metal guide on the presser
foot.
> Guide the folded edge evenly along the metal guide of the foot to sew the stitches evenly deep.
– Make sure that the needle only pierces the edge of the fold.