Buttonholes
94
Buttonhole Buttonhole
number
Name Description
62 Straight-stitch eyelet Openings for cords and narrow ribbons,
for decorative work.
9.2 Making use of the height compensation tool
When a buttonhole is to be sewn at right angles to the project edge, it is recommend to use the height
compensation plates (optional accessory).
> Place the plates from the back between the sewing project and the bottom of the slide to the thick part
of the sewing project.
> Lower the presser foot.
9.3 Using the compensation plate
When sewing a buttonhole in difficult materials, it is recommended to use the compensation plate for
buttonholes (optional accessory). It can be used along with the Buttonhole foot No. 3A.
> Insert the compensation plate carefully from the side.
To Next Page
Loading...
