Bernina 435 - Setup and Preparation; Connecting and Powering On

Sewing preparation
30
2 Sewing preparation
2.1 Connection and Switching on
Connecting the foot control
> Unwind the cable of the foot control to the desired length.
> Insert the cable of the foot control into the foot control connection.
Connecting the machine
> Insert the power cable into the power cord connection.
> Insert the power cable into the power cord connection.
Attaching the knee lifter of the Free Hand System (optional accessory)
The lateral position of the knee lifter can be adjusted by your local BERNINA Dealer if required.
> Insert the knee lifter into the opening at the front side of the machine.