My BERNINA
50
BERNINA SEWING MACHINE WORKBOOK
STITCH DESIGNER–B 880 PLUS / 790 PLUS
Editing Stitches
1. In Sewing, select Stitch #112.
2. Select Stitch Designer.
3. The needlepoint selected is the last stitch, needlepoint #35.
4. Set the Selection Tool to ‘select some’ (select from a particular point).
5. Use the back arrow to select the satin stitch leaf including the long
stitch under the satin stitching (Needlepoint: 15/35).
6. Select Duplicate.
7. Select Mirror Image Left/Right.
8. Select Move.
9. Use the Lower Multi-function knob to move the duplicated leaf to the
desired position below the original leaf.
10. The stitch between the 2 satin leaves is a longer stitch than the others.
To insert a stitch, set Selection to Single Point.
11. With Move still selected, use the arrows to advance to needlepoint 35.
12. Select the Draw (pencil) tool.
13. Tap the new stitch and move if desired with the knobs. The knobs are
always active, regardless if Move is selected.
14. Check to conrm; stitch and/or save if desired.
# 3
# 5
# 9
# 11
# 13
To Next Page
Loading...
