46
Practical stitches
5
Top stitching edges
Blindstitch foot/sole No. 5
Reverse pattern foot/sole No. 1
Edge stitch foot No. 10 */**
Straight stitch No. 1
Narrow edgestitching
Outer edges
█
place edge of fold left against the guide on the blindstitch foot/sole
█
select needle position at the desired distance left from the folded edge
Wide edgestitching
Material guidance
Presser foot as guide:
█
guide the folded edge along the edge of the presser foot
Stitch plate as guide:
█
guide the folded edge along the marks on the stitch plate (1 to 2.5cm)
Seam guide as guide:
█
loosen the screw on the back of the presser foot
█
insert the seam guide into the hole of the presser foot
█
adjust the wide as desired
█
tighten the screw
█
guide the folded edge along the seam guide
Presser foot shaft/sole
█
insert the seam guide into the hole of the presser foot shank
█
adjust wide as desired
█
guide the folded edge along the seam guide
To sew parallel wide lines, guide the seam guide along a previously sewn line
of stitches.
Blindstitch foot/sole No. 5
Needle position left or far right.
Reverse pattern foot/sole No. 1 and Edge stitch foot No. 10
(optinal accessory)
Any needle position possible.
Hem edges
█
place edge of fold (inside upper edge of hem) right against the guide on the
Blindstitch foot/sole
█
select needle position to the right to sew along the upper edge
To Next Page
