48
Practical stitches
Reverse pattern foot/sole No. 1
Securing program No. 5
for all fabrics
secures beginning and end of seam
Sewing long seams with straight stitch
Even securing by defined stitch count.
Sew begin
█
press the foot control
►
the sewing computer secures automatically when beginning to sew
(5 stitches forward, 5 stitches reverse)
█
sew seam with straight stitches in desired length
Ending the seam
█
press «Quick reverse»-button
►
the sewing computer secures seam automatically (5 stitches reverse,
5 stitches forward)
►
the sewing computer stops automatically at the end of the securing
program
Securing program
Darning foot No. 9 */**
Basting stitch No. 30
for work which requires a very long stitch
bastes seams, hems, quilts etc.
temporary joining
easy to remove
Preparation
█
lower the feed dog
█
pin work at a right angle to basting direction
►
to prevent the layers from slipping
Basting
█
place fabric under the presser foot
█
hold the threads while sewing the first stitch
█
pull work from behind to the required length of the stitch
█
sew one stitch
█
repeat the procedure
Securing/fixing the thread
Lower feed dog, sew at the beginning and at the end 3-4 basting
stitches in the same place.
Thread
Use a fine darning thread for basting as it is easier to remove.
Basting stitch
To Next Page
