33
Start the machine to sew the buttonhole.
The buttonhole will be automatically sewn.
The machine will sew the left row first.
The machine will sew the back bartack and the right row.
The machine will sew the front bartack, then it stops auto-
matically.
PLEASE NOTE:
If you start sewing the buttonhole without lowering the but-
tonhole lever, the LCD display will show “bL” message and
the buttonhole lever sign will blink.
Lower the buttonhole lever, then restart the machine.
Remove the fabric and place a pin just below the bartack
at each end to prevent accidentally cutting stitches. Cut the
opening with the seam ripper .
Pin
Seam ripper
When buttonhole sewing is finished, push the buttonhole
lever upward as far as it will go.
Buttonhole lever
To Next Page
Loading...
