40
Attach the zipper foot with the pin on the right. Sew through
all the layers from the end of the zipper opening, guiding the
zipper teeth along the edge of the foot. Stop the machine
2˝ (5 cm) before the foot reaches the slider on the zipper
tape. Lower the needle into the fabric, and raise the foot.
Open the zipper, then lower the foot and stitch the remain-
der of the seam.
Slider
2˝ (5 cm)
Close the zipper and open the upper fabric flat over the zip-
per. Baste the upper fabric and zipper tape together.
Basting stitch
Attach the zipper foot with the pin on the left. Sew reverse
stitches 3/8˝ (1 cm) over the end of the zipper opening. Turn
the fabric 90 degrees and stitch through the garment and
zipper tape.
Reverse stitches
Stop the machine 2˝ (5 cm) before the foot reaches the
slider on the zipper tape. Lower the needle into the fabric,
and raise the foot. Remove the basting stitches.
Basting stitch
Open the zipper, then lower the foot and stitch the remain-
der of the seam.
After finished sewing, remove the basting stitches on the
upper fabric.
To Next Page
Loading...
