Setting up the machine
40
> To position the needle up/down, press the foot control down with the heel «Back-kick».
The «Back-kick» is deactivated when the machine covers are open.
Acoustic signal
If the sewing preparation of the machine or the air threading process is not guaranteed, an acustic signal
sounds by pressing the foot control. Troubleshooting Guide
> Lower the presser foot.
> «Back-kick» to set needle in topmost position.
> Close the looper cover and the threader cover.
2.4 Presser foot
Positioning the presser foot up/down
The lifted presser foot allows you to place the sewing project under the presser foot. The lowered presser
foot is a prerequisite for starting to sew.
> Lift the Presser Foot Lifter until it engages.
– The presser foot remains in the upper position.
– The Thread Tension is released.
To Next Page
Loading...
