Bernina L860 - 2.5 Needle Area Components; Needle Holder Description; Needles for Overlock Stitches; Changing the Needle

Setting up the machine
44
2.5 Needle area
Needle Holder
The needle holder can hold three needles. The machine is designed for needles of the ELx705 system. Needle
sizes between 70 − 90 are to be used for this machine.
Needles for Overlock Stitches
«LN» Left Needle for Overlock Stitches.
«RN» Right Needle for Overlock Stitches.
Changing the Needle
The use of the Needle Inserter is recommended and prevents the needle from falling into the Feed Dog area.
(see page23)
Correctly inserted needles are not at the same height.
NOTICE
Damage due to excessive tightening of the screws
The threads of the Needle Holder may be damaged. A repair by the Authorized BERNINA dealer is required.
> Do not overtighten the Needle Screws.
Prerequisite:
• The needles are in the top position.
• The presser foot is up and swung out.