Berthoud VANTAGE E.C.TRONIC 28-30 - Hydraulic Strut; Ribbon Gauge; Nivelec Gauge; Nivomatic Gauge

82527 Vantage 19
2.8 HYDRAULIC STRUT
The strut (1) is articulated on the drawbar by the cyl-
inder (2). When the machine is unhitched, the shoe
(3) rests on the ground.
Use a solenoid valve on the tractor to raise or lower
the drawbar.
17
2
3
1
2.10 NIVELEC GAUGE
The NIVELEC (1) unit gives a digital display of the
volume in the tank.
The NIVELEC gauge is visible from inside the tractor's
cab (on the EC-TRONIC unit) and the work position
(on the remote unit (1)) (Berlogic).
19
1
2.11 NIVOMATIC GAUGE
The NIVOMATIC unit (1) not only gives the digital
display of the volume in the tank, but also enables you
to programme the ll volume. Combined with a control
unit, it can trigger a sound alarm or the automatic cut-
off of the lling as soon as the programmed volume
is reached, thereby preventing accidental overows.
The NIVOMATIC gauge is visible from inside the
tractor's cab (on the EC-TRONIC unit) and the work
position (on the remote unit (1)) (Berlogic).
20
1
2.9 RIBBON GAUGE
A ribbon gauge (1), readable inside the tractor's cab
and from the work position (Berlogic), is placed on
the top of the machine's tank.
0
18
1