Need help?Do you have a question about the Berthoud HERMES 800 and is the answer not in the manual?
General| Brand | Berthoud |
|---|---|
| Model | HERMES 800 |
| Category | Paint Sprayer |
| Language | English |
Details on chassis, structure, hitching, tanks, pump, regulation, controls, standards, and functions.
Dimensions A, B, C for different boom models.
Kerb weight and maximum gross vehicle weight for different models.
Explanation of the information plate details and its components.
Atmospheric noise levels emitted by the sprayer when working.
Visual guide showing the location of various safety stickers on the equipment.
Details on the non-slip step for accessing the manhole and its operation.
Description and location of the direct read float gauge for monitoring tank volume.
Description of the optional tape gauge for monitoring tank volume.
Recommended working height for booms to avoid drift.
Description of the 120-litre clean water tank for rinsing the sprayer.
Description of the 18-litre clean water tank for handwashing.
Procedure for draining the main tank, including valve operation.
Brief mention of hydraulic agitation for product mixture.
Description of rinsing balls used for the rinsing function.
Procedure for adjusting the transmission shaft length for proper connection.
Steps for correctly attaching the sprayer to the tractor.
Procedure for safely disconnecting the sprayer from the tractor.
Instructions for flushing the equipment with water before initial use.
Guidelines for starting up and checking the sprayer before operation.
How to set the indexing palette and wheel for desired functions.
Procedures for filling the main tank via manhole or external suction.
Details on using the induction hopper for mixing products with water.
Table detailing functions, valve positions, and power take-off settings for spraying.
Table detailing complete rinsing functions and their settings.
How to calibrate the return flow for each boom section.
General advice on cleaning, foam, and final fill for sprayer maintenance.
Details on cleaning and replacing main tank, rinsing tank, and delivery filters.
Instructions for cleaning clogged nozzles using a brush and water.
How to use the external washing brush and recommended detergents.
Advice on protecting the equipment from rust and deterioration.
Checklist for filters, pipes, seals, pump, nozzles, and tank before starting the season.
Table outlining inspection points and recommended maintenance frequency.
Detailed steps for preparing and storing the sprayer for winter.
Instructions for checking and topping up oil in the Gama pumps.
Recommendations for greasing specific parts like universal joints and cams.
To Next Page
