Beta REV 50 User Manual

1
REV 50
Grazie per la fiducia accordata e buon divertimento.
Con questo libretto abbiamo voluto darlLe le informazioni necessarie
per un corretto uso e una buona manutenzione della sua moto.
REV 50
Thank you for choosing BETA. Wishing you lots of good biking!
This manual will give you the information you need to use your motorcycle
correctly and to keep it in excellent condition.
WWW.PlanDeGraissage.ORG

Beta REV 50 Specifications

General

Displacement	49.7 cc
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	Monoshock
Front Brake	Disc
Rear Brake	Disc
Engine Type	Single cylinder, 2-stroke
Front Suspension	Hydraulic telescopic fork

Summary

Section 1 General Information

Main Parts

Identifies and labels the primary components of the motorcycle.

Hand Drive Controls

Details the various controls located on the handlebars for operation.

Technical Data

Provides key specifications and measurements of the motorcycle.

Electrical Diagram

Illustrates the motorcycle's electrical system layout and components.

Section 2 Operation and Use

Checks and Maintenance Before and After Off-Road Use

Outlines essential checks and maintenance procedures for off-road riding.

Fueling

Explains the procedure for refueling the motorcycle with the correct fuel mixture.

Recommended Lubricants and Liquids

Lists the specific lubricants and fluids recommended for optimal performance.

Breaking In

Provides instructions for the initial break-in period of the new motorcycle.

Startup

Details the correct procedures for starting the motorcycle's engine.

Section 3 Maintenance and Checks

Gearbox Oil

Instructions for checking and changing the gearbox oil level and quantity.

Brake Pump Oil

Procedures for checking and topping up the brake fluid in the pump reservoir.

Fork Oil

Guidance on how to replace the oil in the front fork suspension.

Air Filter

Steps for accessing, cleaning, and maintaining the air filter.

Spark Plug

Information on checking, cleaning, and replacing the spark plug for engine performance.

Front Brake

How to check the wear on the front brake pads and replace them.

Rear Brake

Instructions for checking rear brake pad wear and their replacement.

Cooling Liquid

Procedures for checking and maintaining the engine's cooling liquid level.

Valve Petals

Recommends checking valve petals for damage and proper closure every 40 hours.

Checks After Cleaning

Essential checks to perform after cleaning the motorcycle.

Maintenance Schedule

A comprehensive schedule outlining maintenance tasks based on usage hours.

Section 4 Adjustments

Adjustment of Brake

Details how to adjust the front and rear brake levers and pedal for optimal feel.

Adjustment of Clutch

Explains how to adjust the clutch lever position for comfortable operation.

Adjustment of Idling Speed

Guides on how to adjust the engine's idle speed for correct operation.

Adjustment of Gas Clearance

How to adjust the throttle cable play for smooth acceleration response.

Check and Adjustment of Steering Gear

Procedures for checking and adjusting the steering system for play and smooth turning.

Tightening the Chain

Instructions on how to check and adjust the drive chain tension.

Adjustment of Rear Shock Absorber

How to adjust the spring preload on the rear shock absorber.

Section 5 What to Do in an Emergency

Troubleshooting

A guide to diagnosing and resolving common engine and brake issues.