Name: Beta RR 50 cc ENDURO
Brand: Beta
Rating: 4 (1 reviews)

To Next Page

To Previous Page

CHECKS AND MAINTENANCE

AIR FILTER

To access the ﬁ lter:

- Remove screw A and remove the sad-

dle in the direction B indicated in the

ﬁ gure

- Remove the ﬁ lter box cover

- Remove screw E and pull out the ﬁ lter

Sponge ﬁ lter (Enduro, Enduro

Factory)

- wash the ﬁ lter with soap and cold

water

- Dry the ﬁ lter

- Wet the ﬁ lter with ﬁ lter oil, removing

any excess oil so that there is no drip-

ping; we suggest to grease the side

that touches the ﬁ lter box.

Paper ﬁ lter (Motard, Trak, En-

duro standard)

- Blow the ﬁ lter with compressed air.

- If necessary also clean the interior of

the ﬁ lter box

- Reassemble proceeding in the reverse

order.

NOTE:

If the ﬁ lter is damaged, replace it im-

mediately.

WARNING:

After every intervention, check that noth-

ing has been left inside the ﬁ lter box.

Clean the ﬁ lter every time the

vehicle is used cross-country.

Important for the FACTORY

version:

If used on the race track, clean the air

ﬁ lter after each race.

Other manuals for Beta RR 50 cc ENDURO

Questions and Answers:

Need help?

Do you have a question about the Beta RR 50 cc ENDURO and is the answer not in the manual?

General