EasyManua.ls Logo

Beurer FT 90 - Cleaning and Maintenance; Device Cleaning Procedures

Beurer FT 90
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
EN
Non-contact forehead thermometer FT 90
Note: The codes below are printed on batteries containing harmful substances:
Pb = battery contains lead, Cd = battery contains cadmium, Hg = battery
contains mercury. The batteries in this device do not contain any pollutants.
11. Cleaning the device
NOTICE:
Do not subject the device to mechanical impacts.
When not in use, store the thermometer in the provided storage case.
Do not expose the device to liquids. The device is not waterproof. Avoid all
direct contact with water or other liquids.
Do not expose the device to direct sunlight.
Clean the measuring sensor before each use.
Do not touch the measuring sensor with fi ngers.
The measuring sensor is the most sensitive part of the thermometer. Take great
care of the measuring sensor when cleaning the device.
Do not use any harsh cleaning products.
Always observe all safety notes for user and device.
Safety notes
Z
Page 2 – 6.
Clean the measuring sensor after each use. Use a clean cloth or cotton bud that can be
moistened with disinfectant or 70 % alcohol.
To clean the entire device, please use a soft cloth slightly moistened with a mild soapy solu-
tion. Under no circumstances may liquid enter the device.
Do not use the device again until it is completely dry.
Pb Cd Hg

Other manuals for Beurer FT 90

Related product manuals