22
Isssue 2
Doc. No. 002 Issue 2 April 1998
6 Choose which days the time zone should be valid. 1=Monday,
2=Tuesday etc. If the time zone should be valid the whole
week, press 1, 2, 3, 4, 5, 6, and 7. If it should only be valid
Saturdays and Sundays, press 6 and 7. If the wrong digit is
typed, press the same digit once more to delete it.
7 Press . The following text is displayed:
ENTER TIME (ZONE 2)
-
8 Enter the desired time interval and days for the next time zone,
if more time zones are needed.
Otherwise, press
Esc
. The main menu is displayed.
Access codes
Take out the Codes chart and program the access codes to be
used in the entrances:
1 Choose CODES (Press 1). The following text is displayed:
1) NEW 2) EDIT
3) DELETE 4) PRINT
2 Choose NEW (1). The following text is displayed:
ENTER NEW CODE
3 Enter a new four-digit code, e.g. 1111.
4 Press . The following text is displayed:
WHICH DOORS?
1111 ( )
The entered code is automatically displayed bottom left.
4. PROGRAMMING
New entry
To Next Page
Loading...