EasyManua.ls Logo

Bewator Telecode 5000 - Approved Connection Locations

Bewator Telecode 5000
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
Isssue 2
Doc. No. 002 Issue 2 April 1998
Manufacturer
The TC5000 is supplied in the UK by Bewator Division of
Metric Security Ltd.
Functions
The TC5000 has the following functions:
· Automatic dialing of a stored number
· Loop disconnect signalling
· Multi-frequency signalling
· Automatic answer
Auto-calling
In order to minimize the risk of inconvenience to other
network subscribers, users are advised to carefully check all
numbers entered during the set-up of stored numbers prior to
dialing.
Where to connect the TC5000
The TC5000 may only be connected to the following
installations
· Direct Exchange Lines ( D.E.L.s ) with loop disconnect
and /or multi-frequency signaling i.e. a line directly
connected to a telephone exchange with its own
exchange numbers.
8. UK STATUTORY INFORMATION